This lesson describes how to make elements reusable that you created in the previous lessons. For more information, refer to Example Task for Using the Basic Elements of AutomationDesk.
You have to know how to edit an automation sequence (refer to Lesson 1: Creating Your First Project) and how to parameterize an automation sequence (refer to Lesson 2: Parameterizing the Automation Sequence).
AutomationDesk allows automation tasks to be saved as reusable library elements.
You will extract a single automation block and a subsequence from the Tutorial demo project, and save them as automation templates in your custom library.
You will also learn how to save a complete automation sequence as a automation template in a library.
You will define the behavior of the specified data objects and descriptions.
You will also learn how to make the automation templates available to your colleagues.
If it is not your job to create reusable elements, you can skip this lesson.
Working through this lesson will take you about 10 minutes.
Refer to Results of Lesson 4.
The starting point of this lesson is the AutomationDesk project you created in lesson 3.
If you have not created your own AutomationDesk project as shown in the previous lessons, you can use the prepared demo project Tutorialdemo03.adpx. You can find it at <DocumentsFolder>\Tutorial Demos.
Now you can start with the first step, refer to Step 1: How to Prepare Creating Library Elements.