Introduction to Lesson 3

Task to be performed

This lesson describes how to execute the basic task that you prepared in lesson 1 and 2. For more information, refer to Example Task for Using the Basic Elements of AutomationDesk.

Before you begin

You have to know how to parameterize an automation sequence (refer to Lesson 2: Parameterizing the Automation Sequence).

What you will learn

To execute an automation sequence, you have to make several settings with regard to the report generation.

  • You will execute an automation sequence.

  • You will also learn how to specify report parameters which affect the report output.

  • You will generate a report.

Duration

Working through this lesson will take you about 15 minutes.

Summary

To check the correctness of the executed steps, refer to Results of Lesson 3.

Starting point

The starting point of this lesson is the AutomationDesk project you created in lesson 2.

If you have not created your own AutomationDesk project as shown in the previous lessons, you can use the prepared demo project Tutorialdemo02.adp. It can be found at <DocumentsFolder>\Tutorial Demos.

Now you can start with the first step, refer to Step 1: How to Execute a Sequence.

Redaction